PCK、PC型錘式破碎機

一、簡介

I. Profile

錘式破碎機是冶金、建材、化工和水電等工業部門中細碎石灰石、煤或其他中等硬度以下脆性物料的主要設備之一，具有破碎比大，生產能力高，產品粒度均勻等特點。

Hammer crusher is one of the main types of  equipment to crush limestone, coal or brittle materials of below medium  hardness in industrial departments such as metallurgy, building material,  chemical, as well as water and electricity. It has characteristics including  big crushing ratio, high production capacity, uniform particle size of crushed  products etc.

我公司已有三十多年設計制造錘式破碎機的歷史，產品結構先進，性能可靠，工作平穩，能耗低。我公司生產的錘式破碎機已形成系列，深受國內外用戶歡迎。

Our company has now been engaged in the  design and production of hammer crushers for more than thirty years. Our  products are characterized by advanced product structure, smooth operation and  low energy consumption. Our company has manufactured a series of hammer  crushers which are well received by users at home and abroad.

二、工作原理

II. Work Principle

主要是靠沖擊作用來破碎物料的。破碎過程大致是這樣的，物料進入破碎機中，遭受到高速回轉的錘頭的沖擊而破碎，破碎了的物料，從錘頭處獲得動能，從高速?zèng)_向架體內擋板，篩條，與此同時物料相互撞擊，遭到多次破碎，小于篩條之間隙的物料，從間隙中排出，個別較大的物料，在篩條上再次經錘頭的沖擊，研磨，擠壓而破碎，物料被錘頭從間隙中擠出。從而獲得所需粒度的產品。

Hammer crushers crush materials through  impact. The crushing process is: When the materials get into the crushers, they  crumble after impacted by the rapidly rotating hammer; the crumbled materials  then gain kinetic energy from the hammer and run towards the baffle and grate  bar at a high speed; at the same time, the materials crash into each other and  are crumbled for many times; materials which are narrower than the gap between  grate bars get out from the gap while larger materials crumble after impacted,  grinded, and extruded once again on the grate bar before they are squeezed out  from the gap by the hammer, so as to get products of needed particle size.

錘式破碎機分可逆式和不可逆式兩種，可逆式錘式破碎機的轉子可逆，一般用于細碎；不可逆式錘式破碎機的轉子不可逆，一般用于中碎。

Hammer crushers are divided into reversible  ones and non-reversible ones. The rotors of reversible hammer crushers are  reversible. Such hammer crushers are normally used for fine crushing. The rotors  of non-reversible hammer crushers are non-reversible. Such hammer crushers are  normally used for intermediate crushing.

三、主要結構

III. Main Structure

主要由架體、轉子、篩條，打擊板和調整裝置等組成。

Such hammer crusher is mainly composed of  the frame, rotor, grate bar, beater plate, adjusting device, etc.

四、主要性能參數表

PCK系列性能參數表

PC系列性能參數表